LED flood lights are broad-beamed lighting fixtures designed to cover a large area or “flood” the place with light. They are typically used in large and improperly lit places as they flood the space with uniform illumination. LED flood lights outdoor have different shapes and sizes, which may be suited to different needs and requirements of the customers. You can see anywhere from the lighting of large stadiums and parks to lighting up your own lawn. The application is very wide. They are mainly used for outdoors, but you may see them being used indoors as well, for example, to light up a garage or warehouse, theaters, gym, etc

 

What benefit or advantage of using LED flood lights outdoor?

Compared with traditional incandescent bulbs, high-pressure sodium lamps, or halogen lamps, the advantages of LED floodlights cannot be overemphasized.

 

  1. LED flood light provides better visual presentation:

LED floodlights can produce white light equivalent to daylight. Therefore, it is better than standard bulbs and is suitable for outdoor and indoor places with insufficient light. This proper lighting helps to illuminate parking lots, streets, and sidewalks while making people around feel safe. Likewise, the white light beam of the LED creates a modern and attractive appearance for the environment, making its best features stand out even at night.

 

  1. LED lighting energy saving:

Another advantage of LED flood light outdoor is their energy efficiency. Compared with traditional fluorescent lamps, halogen lamps, and high-pressure sodium lamps, various light sources consume less power. Therefore, they are most suitable for illuminating outdoor areas intended for commercial or commercial purposes. You can use them in entertainment centers, parking lots, and other places while getting the energy-saving advantages of led floodlights outdoor.

 

  1. LED lights are cost-effective:

The use of LEDs in lighting is cost-effective, which has led to the popularity of LED lights. They consume less electricity while still providing a bright white clean light, helping to reduce utility bills. LEDs are also durable, which means they are strong enough to not be easily damaged, thus eliminating the need to replace them frequently.

 

  1. The long service life of LED lights:

The long-lasting characteristics of LED floodlights make them a better choice for outdoor lighting. They are worth up to ten times the (average) hours of continuous use of ordinary floodlights (such as halogen, incandescent, or fluorescent lamps). Specifically, the service life of outdoor LED floodlights outdoor is between 50,000 and 100,000 hours, which is much higher than the 1,000 to 30,000 hours provided by traditional light sources.

What’s LED Flood Lights?

Compared with incandescent lamps, energy-saving is about 75%. The luminous flux of 85W floodlights is roughly equivalent to that of 500W incandescent lamps.

 

Considering the fact that LEDs will not disappear immediately when their lifespan is approaching, this is even better, which gives you enough budget time to make changes. They gradually darken; a clear sign is that it is time to make changes.

What’s LED Flood Lights?
  1. Environment friendly:

LED does not contain mercury, lead, and carbon emissions. LED floodlights outdoor do not contain mercury, lead, and other harmful substances harmful to the human body and the environment. They are energy-friendly, so they do not emit carbon. It uses solid amalgam, which will not pollute the environment even if it is broken. It has a recyclable rate of over 99% and is a truly environmentally friendly green light source.

 

In contrast, fluorescent lamps are produced using mercury (a neurotoxin found in energy-saving lamps and fluorescent lamp systems). If they are discarded and broken up, they may be dangerous to your health.

 

  1. Free of Heat, Noise:

LED floodlights generate less heat. It can be started and restarted immediately, and there will be no light decay phenomenon in ordinary discharge lamps with electrodes when it is turned on and off many times. On the contrary, incandescent lights use only 10% of the power consumed to produce visible light, whereas the other 90% is given off as noise, heat, ultraviolet, and infrared emissions. LEDs, on the other hand, produce less heat, which reduces the potential for electrical and fire accidents.

 

  1. Excellent electrical performance: high power factor, low current harmonics, constant voltage power supply, output constant luminous flux.

 

  1. No stroboscopic: Because of its high working frequency, it is regarded as “no stroboscopic effect”, which will not cause eye fatigue and protect eye health.

 

  1. The flexibility of installation: It can be installed at any angle and any position without restriction.

 

What else should be paid attention to for the flood light?

  1. High-purity aluminum reflector, the most accurate beam, and the best reflection effect.
  2. Symmetrical narrow-angle, wide-angle and asymmetric light distribution systems.
  3. Open-back light bulb replacement, easy maintenance.
  4. The lamps are all attached with a scale plate to facilitate the adjustment of the irradiation angle.

 

The LED flood light outdoor is controlled by a built-in microchip. In small engineering applications, it can be used without a controller. It can achieve dynamic effects such as gradation, jump, color flashing, random flashing, and gradual alternation. It can also be controlled by DMX. Realize effects such as chasing and scanning. At present, its main application places are probably these: single buildings, exterior wall lighting of historical buildings, building interior and exterior lighting, indoor local lighting, green landscape lighting, billboard lighting, medical and cultural and other specialized facility lighting, bars, Atmosphere lighting in entertainment venues such as dance halls and so on.

 

LED spotlight VS LED floodlight

The LED flood light is a point light source that can illuminate uniformly in all directions. Its illumination range can be adjusted arbitrarily, and it appears as a regular octahedron icon in the scene. Floodlights are the most widely used light source in the production of renderings. Standard floodlights are used to illuminate the entire scene. Multiple floodlights can be used in the scene to produce better results.

 

Floodlights are the most widely used light source in renderings. Multiple floodlights can be used in the scene to coordinate their effects to produce better results. It is to illuminate the object uniformly in all directions from a specific point. It is best to use it as an analogy to light bulbs and candles. Floodlights can be placed anywhere in the scene.

 

For example, it can be placed outside the camera’s range or inside an object. It is common to use many different colored floodlights at a distance in the scene. These floodlights can project and blend the darkness on the model. Because the floodlight has a relatively large illumination range, the illumination effect of the floodlight is very easy to predict, and this kind of light has many auxiliary uses, for example, placing the floodlight close to the surface of the object will be on the surface of the object. It produces a bright light.

 

It should be noted that floodlights cannot be built too much, otherwise, the renderings will appear dull and dull. Therefore, in the usual rendering of renderings, pay more attention to the impact of lighting parameters and layout on the light perception of the entire renderings scene, accumulate more experience, and master the lighting matching skills.

 

What’s the features of led floodlights?

Under the small current, the temperature rise of LED floodlights is not obvious. If the ambient temperature is high, the dominant wavelength of the LED floodlight will be red-shifted, the brightness will decrease, and the uniformity and consistency of the luminescence will deteriorate. In particular, the temperature rise of the dot matrix and the large display has a more significant impact on the reliability and stability of LED floodlights. So the heat dissipation design is very important.

 

LED floodlights outdoor illuminate objects uniformly in all directions from a specific point. It is the best analogy to light bulbs and candles. Floodlights can be placed anywhere in the scene. For example, it can be placed outside the camera’s range or inside an object. It is common to use many different colored floodlights at a distance in the scene. These floodlights can project and blend the darkness on the model. Because the floodlight has a relatively large illumination range, the illumination effect of the floodlight is very easy to predict, and this kind of light has many auxiliary uses, for example, placing the floodlight close to the surface of the object will be on the surface It produces a bright light.

 

What’s led spotlight?

The LED spotlight is also called projection lights, spotlights, etc. They are mainly used for architectural decoration lighting and commercial space lighting. The decorative components are heavier, and their shapes are round and square, because they are generally The reason for heat dissipation must be considered, so its appearance is still somewhat different from traditional spotlights.

 

LED spotlight classification:

  1. a rotationally symmetrical shape

The luminaire adopts a rotationally symmetrical reflector, and the symmetry axis of the light source with rotationally symmetrical light distribution is installed along the axis of the reflector. The iso-intensity curves of this type of lamp are concentric circles. When this type of spotlight is illuminated by a single lamp, an elliptical spot is obtained on the illuminated surface, and the illuminance is uneven; but when multiple lamps are illuminated, the spots are superimposed on each other, which can produce a satisfactory lighting effect. For example, hundreds of rotationally symmetrical floodlights are commonly used in stadiums, and they are installed on high towers around the stadium to obtain high illuminance and high uniformity lighting effects.

 

  1. Two symmetrical plane shapes

The iso-intensity curve of this type of projector has two symmetry planes. Most luminaires use symmetrical cylindrical reflectors, and linear light sources are installed along the cylindrical axis.

 

  1. Asymmetrical plane shape

The isobaric intensity curve of the luminaire has only one symmetry plane (Figure 2). The luminaire adopts an asymmetrical cylindrical reflector or symmetrical cylindrical reflector plus a grid that restricts light. The most typical is the sharp cut-off block retracted light distribution. This kind of light intensity distribution single lamp can obtain a more satisfactory illuminance distribution.

 

  1. Asymmetrical shape

The iso-intensity curve of this type of luminaire has no symmetry plane. Mainly use mixed light lamps with different types of light sources with a large difference in light intensity distribution and special lamps designed according to the specific lighting requirements of the place of use.

LED sentence light features:

At present, the commonly used LED floodlights on the market basically use 1W high-power LEDs (each LED component will have a high-efficiency lens made of PMMA, and its main function is to secondarily distribute the light emitted by the LED, which is two Secondary optics), and a few companies have chosen 3W or higher power LEDs because of the good heat dissipation technology. It is suitable for large-scale occasions, lighting, buildings, and other lighting.

 

What else should be paid attention to in the spotlight?

  • High-purity aluminum reflector, the most accurate beam, and the best reflection effect.
  • Symmetrical narrow-angle, wide-angle and asymmetric light distribution systems.
  • Open-back light bulb replacement, easy maintenance.
  • The lamps are all attached with a scale plate to facilitate adjustment of the irradiation angle.

 

The LED spotlight is controlled by a built-in microchip. In small engineering applications, it can be used without a controller. It can achieve dynamic effects such as gradation, jump, color flashing, random flashing, and gradual alternation. It can also be controlled by DMX to achieve chase, Scanning, and other effects. At present, its main application places are probably these: single buildings, exterior wall lighting of historical buildings, building interior and exterior lighting, indoor local lighting, green landscape lighting, billboard lighting, medical and cultural and other specialized facility lighting, bars, Atmosphere lighting in entertainment venues such as dance halls and so on.

What’s LED Flood Lights?

What’s the difference between LED spotlights and floodlights?

The difference between floodlights and spotlights is not only reflected in the visual effects of lighting, but also in the use of led floodlights outdoor and spotlights.

 

The difference between floodlights and spotlights is that floodlights cannot be built too much, so the visual effect will appear dull and dull. In the production, pay more attention to the lighting parameters and the influence of the light perception on the entire rendering scene. Spotlights need to pay attention to the following: the most accurate beam, high-purity aluminum reflector, the best reflection effect, symmetrical narrow-angle, wide-angle, and asymmetrical light distribution system, and the spotlight fixtures are equipped with a scale plate for easy adjustment of the illumination angle.

 

The difference between led floodlights and spotlights is also reflected in the range of illumination between the two. Spotlights are also called projection lights, spotlights, spotlights, etc. They are mainly used for architectural decoration lighting and commercial space lighting, and their decorative components are heavier. , There are many kinds of styles in styling design. A floodlight is a point light source that can evenly illuminate all places in all directions, and its illumination range can be adjusted arbitrarily. A standard floodlight can be used to illuminate the entire scene.